Revolution 3D Printers INFINITY 3D Specifications download pdf (Page 21)

Revolution 3D Printers INFINITY 3D

8-Sep-14 21 21

ABS/Acetone Glue

Acetone is not included or required for the INFINITY 3D printer.

Acetone can cause skin irritation when prolonged skin contact occurs. It is

recommended to use acetone safe gloves when applying the ABS/acetone glue. Use

the ABS/acetone glue in a well-ventilated space. Leave the mixture bottle closed

except when applying to the bed. Acetone liquid and vapours are highly flammable.

Keep acetone away from open fames and high temperature sources, including the

3D printer. Read the warnings label on your purchased acetone packaging for

additional warnings.

Using an HDPE acetone safe bottle 200ml, fill the bottle 3/4 full with acetone. Now

cut eight, 75mm lengths of ABS filament and put them in the bottle with the

acetone. Allow the ABS filament to dissolve for 4-6 hours.

When applying the acetone/ABS mixture it will work best when the bed

temperature is below 60C. To apply the acetone/ABS mixture use an acid brush or

similar and brush onto the cool print surface to apply a thin layer of ABS. Generally

only one thin layer of the acetone/ABS solution is needed. However, if needed you

can apply multiple coats.

1 2 ... 16 17 18 19 20 21 22 23 24

No comments

Revolution 3D Printers INFINITY 3D Specifications Page 21